home I contact us I whats new I calendar I product catalog I additional info I potters news
                        empty bowls


 

MARJON CERAMICS INC.
3434 W. EARLL DR. PHOENIX, AZ 85017
  PHONE (602) 272-6585   FAX (602) 272-1507

426 W. ALTURAS TUCSON, AZ 85705
  PHONE (520) 624-2872   FAX (520) 624-3127
                                                                                                BANDING & DECORATING WHEELS
AM078
 AMACO 7" BANDING WHEEL
 Can be used as portable equipment or attached permanently to a worktable for finishing, decorating or hand modeling. Machined with precision and perfectly balanced. Marked with concentric circles, smooth ball bearing movement, three sizes.
Discontinued
0802
 8" PLASTIC DECORATING WHEEL

Strength combined with light weight, this 8" plastic wheel head is practical, inexpensive, and excellent for modeling, sculpturing, banding, and decorating.
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING
0808
 8" FORMICA DECORATING WHEELS
Are made of two plastic laminate (plastic laminate design will vary from one to the other) covered particle boards with s stainless steel ball bearing, screwed into the inside surfaces of the boards. The 8"  turntables have a 4" bearing capable of supporting at least 200# To clean, wipe with a damp sponge (do not submerge the turntable in water).
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING
0812
 12" FORMICA DECORATING WHEELS
Are made of two plastic laminate (plastic laminate design will vary from one to the other) covered particle boards with s stainless steel ball bearing, screwed into the inside surfaces of the boards.  the 12" turntable have a 6" bearing capable of supporting at least 300#. To clean, wipe with a damp sponge (do not submerge the turntable in water).
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING
0815
 		TILT-A-WHEEL
 Take the stress out of designing on flat items. This turn table works just like an
 easel with a few improvements. Tilting up to 30 degrees, the non-slip pad
holds your piece in place in addition to the key that stops the
7 3/4" table from turning while you work.
Discontinued
TTTTOP
 		TILT-A-WHEEL LARGER TABLE
 For work on larger pieces, simply place this 11 3/4" top
 into the center hole of the turn table.
Discontinued
NL273
 LAGUNA BANDING WHEEL 8 1/2" X 2"
These Laguna banding wheels represent workmanship featuring cast iron/aluminum
wheels and a ring of steel ball bearings wich provide smooth and easy operation.
The concentric circles on the head allow for easy centering.
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING
NL274
 LAGUNA BANDING WHEEL 8 1/2" X 6 1/4"
These Laguna banding wheels represent workmanship featuring cast iron/aluminum
wheels and a ring of steel ball bearings wich provide smooth and easy operation.
The concentric circles on the head allow for easy centering.
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING
NL275
 LAGUNA BANDING WHEEL 8 1/2" X 5"
These Laguna banding wheels represent workmanship featuring cast iron/aluminum
wheels and a ring of steel ball bearings wich provide smooth and easy operation.
The concentric circles on the head allow for easy centering.
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING
NL276
 LAGUNA BANDING WHEEL 10 1/2" X 6 1/4"
These Laguna banding wheels represent workmanship featuring cast iron/aluminum
wheels and a ring of steel ball bearings wich provide smooth and easy operation.
The concentric circles on the head allow for easy centering.
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING
NL277
 LAGUNA BANDING WHEEL 12" X 6 1/4"
These Laguna banding wheels represent workmanship featuring cast iron/aluminum
wheels and a ring of steel ball bearings wich provide smooth and easy operation.
The concentric circles on the head allow for easy centering.
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING
NL278
 LAGUNA BANDING WHEEL 12" X 2"
These Laguna banding wheels represent workmanship featuring cast iron/aluminum
wheels and a ring of steel ball bearings wich provide smooth and easy operation.
The concentric circles on the head allow for easy centering.
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING
NL279
 LAGUNA STAND UP DECORATING & SCULPTURE WHEEL
*Standard height adjust from 29" to 44"
*custom heights available
*Steel construction with wide tripod base
*Perfect for burnishing, spraying decorating and sculpting
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING
BW18L
 SHIMPO BANDING WHEEL 7 1/8" X 2 1/4"
Shimpo’s banding wheels are used for decorating, sculpting, carving and hand building. Designed to provide reliably smooth and even rotation for the most delicate applications.
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING
BW22L
 SHIMPO BANDING WHEEL 8 3/4" X 2 1/4"
Shimpo’s banding wheels are used for decorating, sculpting, carving and hand building. Designed to provide reliably smooth and even rotation for the most delicate applications.
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING
BW25L
 SHIMPO BANDING WHEEL 9 7/8" X 2 1/2"
Shimpo’s banding wheels are used for decorating, sculpting, carving and hand building. Designed to provide reliably smooth and even rotation for the most delicate applications.
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING
BW25H
 SHIMPO BANDING WHEEL 9 7/8" X 7 1/2"
Shimpo’s banding wheels are used for decorating, sculpting, carving and hand building. Designed to provide reliably smooth and even rotation for the most delicate applications.
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING
BW30M
 SHIMPO BANDING WHEEL 11 3/4" X 4 3/4"
Shimpo’s banding wheels are used for decorating, sculpting, carving and hand building. Designed to provide reliably smooth and even rotation for the most delicate applications.
PLEASE CALL OR EMAIL FOR AVAILABILITY AND CURRENT PRICING